Where to buy

Wedding Toast Frame & Candleholder

Wedding Toast Frame & Candleholder

by Ed Smith

Pure elegance for any wedding or bridal shower, this frame and candleholder make beautiful decorations for the special event. Perfect for gift-giving too! Just add a touch of Krylon spray paint.

  • 1
  • 2
  • 3
  • 4
  • 5
3 hours
  • Krylon® ColorMaster Primer – All-Purpose White #51315
  • Krylon® Premium Metallic – Sterling Silver #1030
  • Krylon® Looking Glass® Mirror Like Paint #9033
  • 8-½” x 6-½” Wood Frame with a 4” x 6” Opening
  • Clear Glass Ivy Bowl
  • 3” x 9”White Pillar Candle
  • Plastic Champagne Favor Glasses
  • ¼” Silver Cord, 3 yds.
  • White Sheer Ribbon (1-½” wide, 12” long)
  • Assorted White Wedding Flowers
  • Pearl Sprays
  • Mat board 6” x 3”
  • 9” x 12” Clear Mylar (photo protector sheet works great)
  • Cyrstal Bead Trim (of choice), 1 yd.
  • Silver Heart Charms or Buttons
  • ½” Silver Metallic Ribbon, 1yd.
  • 24-Gauge Silver Wire
  • 2” x 4” Styrofoam

Additional Tools

  • Sponge
  • Hot Glue Gun
  • Hot Glue Sticks
  • Painter’s Tape
  • Double-Sided Tape
  • Floral Wire
  • Scissors
  • Wire Cutters
  • Fine Sandpaper
  • Pencil
  • Ruler
  • Knife
  1. Clean ivy bowl thoroughly inside and out (any fingerprints or smudges inside the ivy bowl will be magnified once spray paint is applied)
  2. Working in a well-ventilated area and following the directions on the spray paint can, coat inside of ivy bowl with the Krylon Looking Glass Mirror Like spray paint
  3. Allow paint to dry
  4. Recoat inside of ivy bowl with Krylon Looking Glass Mirror Like spray paint, as necessary
  5. Cut a strip of Mylar about 3” wide and 9” long
  6. Wipe Mylar clean
  7. Spray Mylar with Krylon Looking Glass Mirror Like spray paint
  8. Allow paint to dry
  9. Recoat Mylar with Krylon Looking Glass Mirror Like spray paint, as necessary
  10. Trim Styrofoam to fit inside the ivy bowl
  11. Glue Styrofoam in place
  12. Place candle on top of Styrofoam and trim bottom edge of candle, if needed
  13. Place Mylar strip around the candle
  14. Attach Mylar to candle with double-sided tape
  15. Tape a row of crystal bead trim around the top edge of the Mylar strip
  16. Tape a row of crystal trim around the neck of the ivy bowl
  17. Glue a strip of silver ribbon around the top edge of each of the crystal bead rows
  18. Cut two 1 yard lengths of silver wire
  19. Twist each lengths of wire around the pencil
  20. Remove wire from pencil
  21. Twist one length of wire around the neck of the ivy bowl
  22. Twist the other length of wire around the candle
  23. Apply hot glue to back of silver heart charms one at a time and press into the candle (the heat of the hot glue will slightly melt the candle and allow the hearts to stick to the candle)

Wedding Toast Frame & Candleholder was designed by Ed Smith.

From wedding day decorating to gift-giving ideas, find unique creations by exploring more Wedding spray paint projects from Krylon.

View More